Anterwell Technology Ltd.
Large Original stock of IC Electronics Components, Transistors, Diodes etc.
High Quality, Reasonable Price, Fast Delivery.
Product Details:
Payment & Shipping Terms:
|
| DC Supply (reference To GND): | 4.0 V | Input Voltage, TTL Pins: | GND -0.3 To 5.5 V |
|---|---|---|---|
| Input Voltage, Other Pins: | GND -0.3 To VCC +0.3 V | Input Current, Any Pin: | -10 To 25 MA |
| Storage Temperature: | -65 To 150 °C | Ambient Operating Temperature: | -40 To 85 °C |
| Highlight: | programming ic chips,ic programmer circuit |
||
LXT6155LE popular Programmable IC Chips 155 Mbps SDH / SONET / ATM Transceiver
The LXT6155 is a high speed fully integrated transceiver designed for 155 Mbps SDH/SONET/ ATM transmission system applications. The LXT6155 provides a LVPECL interface for fiber optics modules, and a CMI interface for coax cable drive. These circuits are implemented using Level One’s proven low power 3.3V CMOS analog and digital circuits.
The transmitter incorporates a parallel-to-serial converter, a frequency multiplier PLL, CMI line encoders, and line interfaces for both coax cable and optical fiber. The receiver incorporates an adaptive equalizer, a clock recovery PLL, Loss of Signal (LOS) detector, CMI and NRZ decoders, a serial-to-parallel converter, and an SDH/SONET frame byte detector/aligner. At the system interface, the LXT6155 offers both parallel 8-bit and serial differential interfaces. The LXT6155 also operates in either Hardware stand-alone mode or Software mode. Software mode is controlled by a serial microprocessor (µP) to program formats and operating/test modes.
Applications
Features
* Complies with:
—Bellcore SONET GR-253
—ITU-T G.703/813/958 STM1
* Two line interface formats:
—Fiber LVPECL NRZ
—Coax CMI
* Transmit synthesizer PLL
* Receive clock recovery PLL
* Adaptive CMI equalizer
* Analog circuitry for transformer drive
* Programmable LOS function
* CMI encoder and decoder
* Serial/Parallel and Parallel/Serial conversion
* Byte alignment for SDH/SONET frames
* Two modes of operation:
—Microprocessor controlled; software mode
—Stand-alone; hardware mode
* No external crystal required. A 19.44 MHz crystal is optional
* Low power consumption (less than 760 mW typical)
* Operates from a single 3.3 V supply
* 64 pin LQFP package
Absolute Maximum Ratings
| Parameter | Sym | Min | Max | Unit |
| DC supply (reference to GND) | Vcc | 4.0 | V | |
| Input voltage, TTL pins | Vin (TTL) | GND -0.3 | 5.5 | V |
| Input voltage, other pins | Vin | GND -0.3 | VCC +0.3 | V |
| Input current, any pin | Iin | -10 | 25 | mA |
| Storage temperature | Tstg | -65 | 150 | °C |
CAUTION:
Operating at or beyond these limits may result in damage to the device. Normal operation not guaranteed at these extremes.
Figure 1. LXT6155 Block Diagram
![]()
LXT6155 Pin Assignments
![]()
LXT6155LE Package Specification
![]()
High Power Rectifier Diode 1N4756A , Silicon Planar Zener Diodes
Bridge Type Rectifier Diode 1N4007 50 to 1000 Volts 1.0 Ampere
1N4742A Silicon Planar Zener Diodes for Stabilized Power Supply
Power Programmable IC Chips XC6SLX100-3FGG484C Spartan-6 Family Overview
128K Bytes Sound IC Chip Programming ATMEGA128-16AU 8 Bit Microcontroller
EMC Programmable IC Chips Compliant Slew Rate Limited EI , Timer IC Chip
SMD Power Mosfet Module L7812CV TO-220 Power Trans Electronic Compoents
2SD1594 3 Pin Transistor NEC NPN Power Transistor Switching High Speed
2N5459 Power Mosfet Transistor N-Channel To-92 Original Stock FSC